Permitting >> Specific Permit Conditions
Specific MACT/GACT, NSPS, and NCAC Permit Conditions Regulatory Guide
40 CFR 63, Maximum Achievable Control Technology (MACT)
40 CFR 63, Generally Available Control Technology (GACT)
40 CFR 60, New Source Performance Standards (NSPS)
Title 15A, North Carolina Administrative Code (NCAC)

The following table is to provide a specific permit conditions regulatory guide for both non-Title V and Title V facilities that are operating an air emission source(s) that is subject to a federal and/or state rule(s) and is either listed on the permit or is exempted from permitting requirements, and is listed on the "Insignificant / Exempt Activities" table attached to the air permit. This guide is to be used to assist the facility in understanding their compliance obligations with respect to emission standards, compliance monitoring, record keeping, and reporting requirements contained in specific MACT, GACT, NSPS, and NCAC rules.

NOTE: These regulatory guides do not necessarily address all applicable requirements. Compliance with an applicable federal and/or state rule is the responsibility of the facility.

MACT/GACT Sources

          Link to EPA Rules, Tools, and Other Information:
          Link to DAQ Contacts:

Promulgated Rule: Source Category: DAQ
Regulatory
Guide:
40 CFR 63, Subpart
BBBBBB (6B)
Gasoline Distribution Bulk Terminals ONLY 11/5/2013 doc pdf
40 CFR 63, Subpart
CCCCCCC (7C)
Paint and Allied Products Manufacturing - condition No. 1 doc pdf
Paint and Allied Products Manufacturing - condition No. 2 (Avoidance) doc pdf
40 CFR 63, Subpart
DDDDDDD (7D)
Prepared Feed Manufacturing 8/27/13 doc pdf
40 CFR 63, Subpart
HHHHHH (6H)
Paint Stripping and Misc. Surface Coating Operations doc pdf
40 CFR 63, Subpart
JJ (2J)
Wood Furniture Manufacturing Operations - Short Condition doc pdf
Wood Furniture Manufacturing Operations - Long Condition doc pdf
40 CFR 63, Subpart
JJJJJJ (6J)
Industrial, Commercial, and Institutional Boilers - Liquid Fuel OR Biomass >= 10 MMbtu/hr (Existing Sources) 3/22/13 doc pdf
Industrial, Commercial, and Institutional Boilers - Liquid Fuel, Coal, OR Biomass < 10 MMbtu/hr (Existing or New Sources) 3/22/13 doc pdf
Industrial, Commercial, and Institutional Boilers - Liquid Fuel Category >= 10 MMbtu/hr using 0.5% limit (New Sources) 3/22/13 doc pdf
Industrial, Commercial, and Institutional Boilers - Avoidance Condition 40 CFR 63 Subpart 6J 3/5/13 doc pdf
40 CFR 63, Subpart
OOOOOO (6O)
Flexible Polyurethane Foam Production and Fabrication doc pdf
Slabstock Flexible Polyurethane Foam Production doc pdf
40 CFR 63, Subpart
VVVVVV (6V)
Chemical Manufacturing Area Sources doc pdf
40 CFR 63, Subpart
WWWWWW (6W)
Plating and Polishing Operations doc pdf
40 CFR 63, Subpart
XXXXXX (6X)
Dry Abrasive Blasting doc pdf
Machining doc pdf
Dry Grinding and Dry Polishing doc pdf
Spray Painting doc pdf
Welding doc pdf
40 CFR 63, Subpart
ZZZZ (4Z)
Reciprocating Internal Combustion Engines - Non-emergency compression ignition greater than 500 Hp (Existing) 2/14/2013 doc pdf
Reciprocating Internal Combustion Engines - Non-emergency compression ignition greater than 300 Hp but less than or equal to 500 Hp. (Existing) 2/14/2013 doc pdf
Reciprocating Internal Combustion Engines - Non-emergency compression ignition 300 Hp and less at area sources (Existing) 7/10/2013 doc pdf
Reciprocating Internal Combustion Engines - Emergency compression ignition located at an area source (Existing) 4/23/2013 doc pdf
Reciprocating Internal Combustion Engines - Emergency spark ignition located at an area source (Existing) 6/11/2013 doc pdf
Reciprocating Internal Combustion Engines - Avoidance Condition for Institutional Emergency (Existing) 4/3/2013 doc pdf
40 CFR 63, Subpart
ZZZZZ (5Z)
Iron and Steel Foundries doc pdf


NSPS Sources
Promulgated Rule: Source Category: DAQ
Regulatory
Guide:
40 CFR 60, Subpart
EE (2E)
Surface Coating of Metal Furniture doc pdf
40 CFR 60, Subpart
OOO (3O)
Quarry - Nonmetallic Mineral Processing Equipment doc pdf
Non-quarry - Nonmetallic Mineral Processing Equipment doc pdf
40 CFR 60, Subpart
IIII (4I)
Compression Ignition Internal Combustion Engines 6/28/2013 doc pdf
40 CFR 60, Subpart
JJJJ (4J)
Stationary Spark Ignition Internal Combustion Engines with Flow Chart 8/13/2013 doc pdf
40 CFR 60, Subpart
TTT (3T)
Spray Booths doc pdf
40 CFR 60, Subpart
UUU (3U)
Calciners and Dryers in Mineral Industries doc pdf


NCAC Sources
Promulgated Rule: Source Category: DAQ
Regulatory
Guide:
Title 15A, NCAC,
Subchapter
  doc pdf